BYD Atto 1 XPE floor mats and boot liner fitment guide from EEVA Store Australia

BYD Atto 1 Floor Mats Guide for Australia

Choosing Floor Mats for the BYD Atto 1

The BYD Atto 1 is designed for practical everyday driving, including commuting, school runs and short city trips. These regular journeys can quickly bring dust, sand, moisture and food spills into the cabin. A well-fitted set of floor mats helps protect the original carpet and makes routine cleaning much easier.

The best option depends on how you use the vehicle and which areas need protection. Some owners only need the cabin floor covered, while others prefer to add a boot liner or rear seat-back protection for shopping, pets and family use.

Why Custom-Fit Floor Mats Matter

Universal mats may leave sections of carpet exposed or move around because their shape is not made for the Atto 1 footwells. Custom-fit mats follow the cabin floor more closely, helping provide more complete coverage and a cleaner finish.

Correct fit is also important around the driver’s footwell. After installation, the mat should sit flat and must not interfere with the accelerator, brake pedal or seat movement. Check every piece before driving and make sure no edge is folded underneath.

What Is XPE Floor Mat Material?

XPE stands for cross-linked polyethylene. It is a lightweight, closed-cell foam material commonly used in vehicle floor protection. The Atto 1 mats available from EEVA Store use a water-resistant surface, raised edges and an anti-slip backing to help contain dirt and spills while keeping the pieces stable during normal use.

XPE does not absorb water like carpet, so mud and wet debris can usually be removed without a long drying time. Its light weight also makes each piece easier to lift out of the vehicle for cleaning.

Textured XPE floor mat material close-up from EEVA Store Australia

XPE Compared with Carpet, Rubber and TPE

  • Carpet: provides a familiar factory-style finish but can hold moisture, dust and stains.
  • Rubber: is durable and easy to rinse, although it can be heavier and may have a more utilitarian appearance.
  • TPE: offers firm moulded protection and good water resistance.
  • XPE: provides a lighter, layered construction with water resistance, raised edges and straightforward cleaning.

No material is right for every owner. XPE is worth considering when easy handling, coverage and simple maintenance are the main priorities.

Atto 1 Areas You Can Protect

EEVA Store offers separate BYD Atto 1 XPE listings, so you can choose only the cabin and cargo areas you want to protect:

Each option has its own product page. Review the product title, images and “What’s Included” section before ordering.

Compatibility and Fitment Checks

These mats are made for the BYD Atto 1. Before ordering, confirm that your vehicle model and the protection set shown on the product page match what you need. When the order arrives, place each piece in position without forcing it and check the following:

  • The driver’s mat sits flat and remains clear of both pedals.
  • The passenger and rear mats follow the footwell without curled edges.
  • The boot liner sits on the intended boot-floor position.
  • Seat-back protection, if selected, does not block latches or folding functions.

If anything appears different from the product listing, take clear photos before using the mats and contact EEVA Store for fitment help.

How to Clean XPE Floor Mats

  1. Remove each piece carefully so loose dirt does not fall back into the cabin.
  2. Shake out debris or use a vacuum for dry dust and crumbs.
  3. Wipe or rinse the surface with water and mild soap where needed.
  4. Avoid harsh chemicals, abrasive brushes and high heat.
  5. Allow the mats to dry fully before reinstalling them.

Regular light cleaning is normally easier than waiting for heavy dirt to build up around the raised edges.

Common Questions

Do I need both floor mats and a boot liner?

Not necessarily. Floor mats protect the passenger cabin, while a boot liner is useful for groceries, sports gear, pets or items that may leave dirt or moisture in the cargo area.

Are the mats waterproof?

The XPE material is water resistant and designed to help contain everyday spills. Remove and clean the mat promptly rather than leaving liquid in the vehicle.

Can I place them over existing mats?

Remove loose factory or aftermarket mats first unless the product instructions clearly state otherwise. Stacking mats can affect stability and pedal clearance.

Shop BYD Atto 1 Floor Mats and Boot Liners

Choose the cabin and cargo protection that suits how you use your Atto 1.

View BYD Atto 1 XPE floor mats and boot liner options

Explore More BYD Atto 1 Accessories

Browse our BYD Atto 1 accessories or compare the wider range of BYD floor mats and boot liners.

Related XPE Protection

Browse all BYD Atto 1 accessories or compare our full range of BYD XPE floor mats and boot liners.

For a wider comparison, read our BYD floor mats and boot liners buying guide and Australian BYD accessories buyer’s guide.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.